Product Description:

The MAF160C-0200-FQ-S2-KH0-35-H3 is a liquid-cooled asynchronous housing motor produced by Bosch Rexroth Indramat within the MAF IndraDyn Asynchronous Motors series. Designed for heavy-duty automation axes, the unit converts drive-inverter output into mechanical rotation while the housing’s coolant channels remove process heat. Its plain shaft couples directly to gearboxes or belt drives, and the flange and foot mounting options let the motor serve in conveyor, spindle, or forming stations where continuous torque and compact installation are required.

The motor has a rated speed of 2000 rpm, achieved by the 0200 winding code and the C-length frame. Liquid cooling is introduced through a connection thread that accepts a 1/2-inch fitting, helping keep stator temperature stable under sustained current. The motor is built without a holding brake or a shaft sealing ring, so external measures must secure load position and protect against fluid ingress at the drive end. A single-turn absolute encoder with an EnDat 2.1 interface supplies position data at 2048 increments, and power is provided by the controller. The motor meets insulation class F, and the enclosure carries a protection rating of IP65, allowing installation where airborne dust or low-pressure water jets are present. Mounting follows DIN EN 60034-14 vibration guidelines, and the flange and foot pattern simplifies alignment with adjoining machinery.

The rotor runs on high-speed bearings to endure the peripheral velocity associated with frame size 160. Operation is permitted within an ambient range of 0 to 40 °C, and vibration level B limits housing displacement for precision mounting. The encoder electronics expect a supply of 7 to 12 V, allowing direct use with compatible IndraDrive controllers. The housing also supports the liquid-cooling path required by the winding and mounting geometry.