Product Description:

The MAF160C-0200-FQ-S2-KH0-05-N1 is an asynchronous housing motor built by Bosch Rexroth Indramat for the MAF IndraDyn Asynchronous Motors series. Designed as a flange-mounted drive element, the unit provides constant torque for production machinery that benefits from a closed coolant circuit. By combining a plain output shaft with standard rolling bearings, the motor fits into automated handling cells where speed regulation is achieved with an external frequency inverter and feedback from an integrated absolute encoder. This layout supports installations that need a rigid mechanical connection and stable motor control during repeated production cycles.

Its mechanical envelope is based on frame size 160 with a C-length core and winding code 0200, giving a rated rotor speed of 2000 rpm. Heat is removed through liquid cooling, and coolant reaches the stator through a connection thread that accepts 1/2-inch fittings, which simplifies routing in a closed cooling loop. This cooling method moves heat away from the motor without depending on surrounding airflow. The motor mounts directly to a machine wall through a flange, and standard bearings support a plain shaft that comes without a shaft sealing ring. Because no holding brake is installed, the driven axis must rely on drive torque or external locks for standstill security. Position and velocity data come from a single-turn absolute encoder that communicates over EnDat2.1, delivers 2048 increments per revolution, and operates from a supply of 7–12 V. That feedback arrangement allows the inverter to monitor shaft motion directly during speed control and positioning tasks.

Electrical insulation corresponds to class F, allowing the windings to withstand elevated internal temperatures produced by the liquid-cooled housing. The cast housing and terminal concept provide a protection rating of IP65, so dust ingress and low-pressure water jets do not affect operation. The motor operates in ambient temperatures from 0 to 40 °C, which suits enclosed machine sections and general industrial installations. Dimensional tolerances and balancing follow DIN EN 60034-14, helping the motor run smoothly when coupled to standard drive components. Vibration class A also supports steady operation in medium-speed applications where consistent rotation and low mechanical disturbance are important.