Product Description:

The MAF160C-0200-FQ-S2-HP0-35-V1 is a liquid-cooled asynchronous housing motor produced by Bosch Rexroth Indramat within the MAF IndraDyn Asynchronous Motors series. Designed for flange or foot integration with conveyors, extruders, or test stands, the unit converts three-phase electrical power into regulated rotary motion for industrial automation. Its frame size 160 with length code C supports the internal stator assembly, and the B-side power connection helps simplify cable routing in compact machines. This layout is well suited to installations where mounting space is limited but stable motor output is still required.

The motor operates at a rated speed of 2000 rpm, which matches common inverter outputs and supports the intended operating range. Heat is removed by liquid cooling through a 1/2-inch connection thread, helping the stator remain within Class F limits at ambient temperatures from 0 to 40 °C. An IP65 enclosure blocks dust and low-pressure water jets, supporting use near damp or washdown-prone areas without extra covers. Position feedback is delivered by a single-turn absolute encoder with 2048 increments, and the EnDat 2.1 interface supplies digital position data to the drive controller. The 0200 winding code suits medium-torque applications, while flange and foot mounting give the motor flexibility in different machine layouts.

Mechanical durability is supported by reinforced bearings, and the rotor is balanced with a complete key to reduce residual vibration and coupling wear. The shaft exit uses a shaft sealing ring to help prevent coolant seepage and protect the internal windings. Power conductors enter through a turnable terminal box, allowing the cable entry direction to be adjusted while keeping the fixed B-side connection. Compliance with DIN EN 60034-14 keeps running behavior within Vibration Level A. The motor also has Class F insulation, a keyway shaft, and no holding brake, so any required holding force must be provided externally when the shaft is at rest.