Product Description:

The part MAF160C-0200-FQ-S2-HP0-35-N1 from Bosch Rexroth Indramat belongs to the MAF IndraDyn Asynchronous Motors series. It is a liquid-cooled asynchronous housing motor for continuous-duty axes in automated lines. With frame size 160 and length code C, the unit supports flange and foot mounting. Its shaft is balanced with a complete key and transmits torque to belts, gears, or direct-drive couplings. The motor is suited to installations that need compact mounting, controlled temperature, and encoder feedback for closed-loop speed control.

The motor uses liquid cooling through an internal jacket, and heat leaves through a 1/2-inch threaded coupling that connects to standard chill-water manifolds. Liquid circulation preserves rated output at ambient temperatures from 0 to 40 °C and helps keep bearing temperature within limits for the standard bearing type. Position feedback is provided by a single-turn absolute encoder with the EnDat2.1 interface. Its resolution of 2048 increments supports fine velocity regulation, and the electronics accept 7–12 V from the drive controller. A rotatable terminal box on the B-side houses the power terminals, allowing the connection to be oriented in confined cabinets. The motor comes without a holding brake, which shortens the motor and suits applications that rely on controlled ramp-down instead of mechanical locking.

At a rated speed of 2000 rpm, winding code 0200 works with shaft sealing to support splash-proof operation while maintaining vibration class A. The housing meets IP65, so dust and low-pressure water jets do not impair operation, and the shaft sealing ring helps prevent coolant or oil migration along the keyed shaft. Insulation class F withstands winding temperatures associated with high current density. Balancing conforms to DIN EN 60034-14, which keeps residual vibration within the stated limits during operation.