Product Description:

The MAF160C-0200-FQ-S2-HH0-35-H3 is a liquid-cooled asynchronous housing motor produced by Bosch Rexroth Indramat within the MAF IndraDyn Asynchronous Motors series. It is intended for drive axes that need continuous torque delivery in confined spaces, such as extruders, rolling tables, or large conveyor sections. The motor integrates into automation lines through a flange or foot interface and converts electrical energy into mechanical rotation for process equipment.

The motor reaches a rated speed of 2000 rpm, which suits mid-range spindle and conveyor duties. Heat is removed by liquid cooling; coolant enters through a 1/2-inch connection thread and exits after passing through the stator jacket, which keeps winding temperatures within F-class limits. A high-precision feedback loop is supported by an EnDat single-turn absolute encoder that outputs 2048 increments per revolution, allowing fine position control without multi-turn counting. Service life is supported by high-speed bearings that tolerate the dynamic loading associated with frequent acceleration. The motor has an IP65 rating, so dust ingress and water jets do not compromise internal components. The motor frame size is 160 with a length code of C, and winding code 0200 indicates the resistance and inductance used with compatible MAF inverters. Power is routed to a turnable terminal box on the B-side, simplifying cable runs inside crowded cabinets. A plain shaft is supplied without a shaft sealing ring, and there is no holding brake, so external equipment must retain load position during power-off conditions. Operation is allowed between 0 °C and 40 °C, provided mounting follows the combined flange and foot arrangement.

The encoder communicates via EnDat2.1 and is powered from a 7–12 V supply, which helps reduce cable losses on long machine runs. Mechanical integrity follows DIN EN 60034-14, and the assembly meets vibration level B for general-purpose rotating apparatus. The liquid circuit’s threaded ports allow connection to closed-loop chillers with standard fittings, while the turnable terminal box maintains strain relief as conduit directions change.