Product Description:

The MAF160C-0200-FQ-S2-FP0-35-V1 is a liquid-cooled asynchronous housing motor built by Bosch Rexroth Indramat for the MAF IndraDyn Asynchronous Motors series. It serves as the primary rotary actuator in automated cells where variable-speed operation must remain stable under continuous duty. It is well suited for conveyors, processing equipment, and other machinery that requires dependable torque over long operating periods. A sealed cooling jacket removes heat from the stator, protecting winding insulation during repetitive cycles. Mechanical mounting flanges let the motor couple directly to gearboxes or driven machinery, keeping the footprint low inside production lines.

The motor relies on liquid cooling routed through a connection thread that matches a 1/2 inch port, simplifying the attachment of closed-loop chillers and helping prevent hot spots. Reinforced bearings endure higher radial and axial loads, while the keyed shaft, balanced with a complete key, minimizes residual vibration at the factory-specified 2000 rpm rated speed. A shaft sealing ring keeps lubricant inside and contaminants out, complementing the IP65 protection class of the housing. Insulation class F windings tolerate elevated temperatures, and the flange and foot mounting pattern gives flexibility when positioning the drive unit.

Position feedback is delivered by a single-turn absolute encoder that communicates through EnDat2.1. Its resolution of 2048 increments supports precise velocity loops, and its logic operates from a supply of 7–12 V provided by the drive controller. Because the unit is supplied without a holding brake, external clamping or drive torque must secure axes during power-off. Frame size 160 with length code C pairs with winding code 0200, and the rotor balance conforms to DIN EN 60034-14 with vibration level A. The permissible ambient range is 0–40 °C for full-load operation.