Product Description:

The MAF160C-0200-FQ-S2-FK0-35-N1 is a liquid-cooled housing motor manufactured by Bosch Rexroth Indramat within the MAF IndraDyn Asynchronous Motors series. It fits a 160 mm frame with the C length code and is intended for continuous duty in automated production cells where precise speed regulation and high thermal loads occur. Used with matched inverters, the motor converts electrical energy into rotational motion for conveyors, forming machines, or test stands while its flange-plus-foot base simplifies rigid integration on steel frames.

The stator jacket circulates coolant through a thread-in port, and the design uses liquid cooling; a 1/2-inch connection thread provides the mechanical interface to plant piping. At a rated speed of 2000 rpm, the rotor delivers consistent torque without exceeding the F-class insulation limit. Position feedback comes from a single-turn absolute encoder with an EnDat 2.1 interface, and its resolution of 2048 increments supports tight velocity loops while a 7–12 V supply powers the sensor electronics. The enclosure has an IP65 protection rating, so sprayed water or dust does not reach the windings, and the absence of a holding brake means external holding devices are required for vertical axes when the drive is de-energized.

The motor uses flange and foot mounting, allowing either surface bolting or baseplate fastening. Output torque is transmitted through a keyed shaft that is balanced with a half key and meets Vibration Level A under DIN EN 60034-14. The winding conductors use F class insulation for 155 °C thermal endurance, and the motor operates in ambient temperatures from 0 - 40 °C. Compliance with the same DIN standard sets limits for axial runout and noise, while the 0200 winding code sets the electrical constants used by the drive controller.