Product Description:

The MAF160C-0200-FQ-S2-FK0-05-N1 is a liquid-cooled asynchronous motor manufactured by Bosch Rexroth Indramat within the MAF IndraDyn Asynchronous Motors series. Delivered as a housing motor, it integrates a closed internal coil circuit that links directly to plant chillers for heat removal. The design targets automation duties requiring continuous torque at moderate speed, such as extruders or spindle drives where stable thermal behavior and high enclosure protection are mandatory. Because the coolant circuit is integrated into the housing, the motor can dissipate heat without an external blower. A dedicated flange mounting surface speeds alignment with gearboxes and other driven assemblies.

Thermal energy is extracted through liquid cooling routed via a 1/2 inch connection thread, so installation only needs a matching pipe union. Under rated conditions, the rotor turns at 2000 min⁻¹, a speed chosen to pair with standard gear ratios and keep induction slip within efficient limits. Position sensing is handled by a single-turn absolute encoder that outputs 2048 increments over the EnDat2.1 interface, providing digital feedback for synchronous vector control. The motor is supplied without a holding brake, and half-key balancing minimizes residual vibration during acceleration.

In service environments, the motor housing carries an IP65 ingress rating, blocking dust and low-pressure water jets so the stator windings remain dry. Those windings use Class F insulation to tolerate internal temperatures that can arise when coolant flow is temporarily restricted. Mechanical stability is complemented by a vibration classification of Level A, aligning with DIN EN 60034-14 for machines that operate on flexible bases. A shaft sealing ring protects the flange-mounted output shaft, and reliable operation is maintained between 0–40 °C in typical industrial spaces.