Product Description:

The MAF160C-0200-FQ-S2-FH0-05-H3 asynchronous motor is produced by Bosch Rexroth Indramat as part of the MAF IndraDyn Asynchronous Motors series. It has a liquid-cooled housing and is intended for industrial automation lines that require continuous rotation at controlled speed, such as extruders, printing rollers, or test stands. The motor mounts on a machine wall through a standardized flange, while its induction rotor and high-speed bearings support smooth operation with a matched frequency inverter. When paired with a suitable inverter, it supports stable speed regulation under changing process loads.

The motor uses frame size 160 with a C-length housing, which sets its axial and radial envelope. A rated speed of 2000 rpm matches the high-speed bearing set, and vibration level B follows DIN EN 60034-14. The motor uses class F insulation, allowing winding temperatures up to 155 °C, and the enclosure is rated IP65 to protect against dust and water jets. Mechanical connection is made by flange mounting, and the drive end uses a plain shaft without a shaft sealing ring, so external sealing is required where oil retention is needed. The assembly has no holding brake and uses winding code 0200 for operation with compatible inverters.

Liquid cooling passes through an integral jacket and uses a 1/2 inch connection thread for connection to plant coolant circuits. The motor can operate in ambient temperatures from 0–40 °C, and its vibration level remains within class B under those conditions. Rotor position is monitored by a single-turn absolute encoder that uses the EnDat2.1 interface, provides 2048 usable increments, and accepts a 7–12 V supply. This feedback supports precise vector control and accurate speed regulation, while the high-speed bearing package helps maintain smooth rotation during operation.