Product Description:

The MAF160C-0200-FQ-S2-EH0-35-H1 is a liquid-cooled asynchronous housing motor produced by Bosch Rexroth Indramat and supplied in the MAF IndraDyn Asynchronous Motors series. It is intended for inverter-controlled machine axes on tools, presses, and processing lines where continuous torque and precise speed regulation are required. A 160-frame housing with flange and foot mounting helps the motor fit compact drive compartments, while the integrated coolant jacket supports stable thermal operation during cyclic and continuous duty.

The bearing arrangement supports high-speed operation, and rated output is achieved at 2000 rpm. Heat is removed by liquid cooling, which helps the motor maintain output when surrounding air temperature rises. The enclosure has an IP65 rating, which helps keep dust and low-pressure water jets away from internal electrical parts. Position feedback is provided by a single-turn absolute encoder with EnDat2.1 communication, and it delivers 2048 increments per revolution while operating from a 7 to 12 V supply. A rotatable terminal box on the A-side houses the power terminals and allows the cable outlet direction to be adjusted for the installation.

The vibration limit follows grade A of DIN EN 60034-14, and the rotor uses a bearing set suited for fast acceleration cycles. Coolant enters and leaves the jacket through a 1/2 inch threaded connection, which matches common manifold fittings. Torque is transmitted through a Plain shaft, and the windings use F insulation class materials that tolerate winding temperatures up to 155 °C while the permitted ambient temperature range remains from 0 to 40 °C. The motor is supplied without a holding brake and without a shaft sealing ring, so any required holding force or added contamination protection must be provided by the surrounding machine.