Product Description:

The MAF160C-0200-FQ-S2-EH0-05-N1 is an asynchronous housing motor produced by Bosch Rexroth Indramat within the MAF IndraDyn Asynchronous Motors series. It supplies controlled rotary motion for automated lines, using a C-length frame with a 160 mm stator diameter and a plain shaft to fit compact drive trains. In industrial automation, this motor connects to a frequency inverter to regulate speed and torque for conveyors, extruders, and forming stations while an internal coolant jacket removes heat generated during continuous duty.

The motor relies on liquid cooling, and coolant circulates through a jacket that connects to the plant circuit through 1/2 inch threaded ports. These ports simplify plumbing when several drives share a common manifold. Mechanical attachment uses flange mounting, which keeps the stator aligned with the driven machine frame and helps minimize radial load on the standard bearings. Power conductors are routed into a turnable terminal box on the A-side, so the gland plate can be rotated to suit cable runs inside crowded cabinets. An ingress protection rating of IP65 seals the housing against dust and low-pressure water jets, supporting washdown maintenance routines without additional shrouds.

Position feedback is provided by a single-turn absolute encoder that communicates through EnDat2.1 and resolves shaft angle into 2048 increments while operating on a supply range of 7-12 V. This feedback enables the inverter to hold the rotor at a rated speed of 2000 rpm even when the load changes. The insulation system is class F, vibration grade is level A, and operation is permitted between 0 °C and 40 °C without derating in accordance with DIN EN 60034-14. The motor has no holding brake or shaft sealing ring, so external measures are required when static load retention or fluid exclusion is needed.