Product Description:

The MAF160C-0200-FQ-S2-EG0-35-N1 is a liquid-cooled asynchronous housing motor in the MAF IndraDyn Asynchronous Motors series from Bosch Rexroth Indramat. It serves in automated material-handling lines, assembly equipment, and test benches where repeatable motion is needed. Its compact frame and stable thermal profile help keep cycle times consistent and limit enclosure heating. These traits suit installations that run for long periods inside enclosed machine sections.

Heat removal is handled by liquid cooling that circulates through a jacket accessed via a standard connection thread; the port is cut to 1/2 inch, allowing quick attachment of industrial hoses. The motor can be mounted by flange or feet, so it fits vertical or horizontal machine frames. Position feedback is provided by a single-turn absolute encoder that transmits data over the EnDat2.1 serial link, delivers 2048 increments per revolution, and operates on a supply range of 7–12 V. This feedback allows the connected drive to monitor rotor position directly during closed-loop operation. The plain shaft is sealed by a ring to help prevent coolant or lubricant leakage, and a standard bearing set supports axial and radial loads. The motor is supplied without a holding brake, so applications that rely on drive torque alone do not use a mechanical holding function.

The housing is rated IP65, which keeps dust out and protects the motor against low-pressure water jets. At a rated speed of 2000 rpm, the C-length frame with size code 160 and winding code 0200 produces nominal output while staying within insulation class F limits. Compliance with DIN EN 60034-14 confirms vibration grade A for general-purpose machinery. The permissible ambient range of 0–40 °C suits enclosure-mounted drives. Electrical power arrives on the A-side through a turnable terminal box, which allows the cable exit to be oriented during installation.