Product Description:

The MAF160C-0200-FQ-S2-EG0-05-N1 is a liquid-cooled asynchronous housing motor produced by Bosch Rexroth Indramat as part of the MAF IndraDyn Asynchronous Motors series. Within an automation line, the motor works with frequency inverters to deliver regulated torque and speed to conveyor sections, plastic-processing screws, or pump modules. Its frame size 160 stator, length code C, and flange mounting pattern allow direct attachment to a chassis plate while helping maintain alignment and a compact installation footprint.

Its thermal management relies on liquid cooling. Coolant enters and exits through a connection thread sized 1/2 inch, so standard industrial hoses can be attached without adapters. The motor carries an EnDat2.1 optical feedback system, and the measuring head resolves rotor angle in 2048 increments for each revolution while sending position data to the drive. At its rated excitation, the rotor reaches 2000 rpm, a speed that suits common pump and extruder gear ratios. Machine enclosures can be washdown cleaned because the housing is sealed to IP65. The encoder electronics operate from 7 to 12 V, and the A-side terminal box can be rotated so power cabling exits in the preferred direction.

Mechanical coupling is through a plain shaft with a shaft sealing ring that helps keep coolant and lubricants out of the stator chamber. Dynamic behavior complies with vibration class A of DIN EN 60034-14, which supports installation on lightly built frames without excessive resonance. Continuous service is permitted at ambient temperatures from 0 to 40 °C, matching common plant operating conditions. The motor also uses insulation class F windings for 155 °C thermal endurance and standard rolling bearings for routine industrial duty. A turnable terminal box helps simplify cable routing, and the motor comes without a holding brake to keep rotor inertia lower.