Product Description:

The MAF160C-0200-FQ-M2-HP0-05-N1 is a liquid-cooled asynchronous housing motor produced by Bosch Rexroth Indramat within the MAF IndraDyn Asynchronous Motors series. It serves as a drive source for automated equipment that must dissipate process heat efficiently while maintaining compact installation geometry. A flange-mounting interface allows direct attachment to gearboxes or machine frames, and the 160 frame size supports medium-power tasks without requiring an oversized housing. Because the motor is supplied without a holding brake, motion control systems must manage stopping torque through the inverter or an external mechanical lock.

The rotor reaches a rated speed of 2000 rpm, which suits general-purpose conveyors, tool spindles, and forming axes. Position feedback is handled by a multi-turn absolute encoder that provides 2048 increments per revolution, communicates via the EnDat2.1 serial protocol, and operates from a feedback supply of 7–12 V. Thermal energy is removed through liquid cooling, and coolant enters and exits the stator jacket through a connection thread sized at 1/2 inch, which helps prevent hot spots during continuous duty. The winding code 0200 indicates the conductor cross-section and impedance matched to the designated inverter, while the shaft is balanced with a complete key to limit residual vibration to level A under DIN EN 60034-14.

The housing carries a protection rating of IP65, which keeps dust and low-pressure water jets away from live parts, and its windings use insulation class F to allow higher thermal rise before degradation. The motor is designed to operate from 0 to 40 °C and uses a standard deep-groove bearing set for typical radial loads. Power enters on the motor’s B-side through a turnable terminal box, which simplifies cable routing in tight cabinets. A shaft sealing ring and keyed shaft profile help limit lubricant loss and support torque transfer, and the C-length frame variant preserves envelope depth when retrofitting legacy machines.