Product Description:

The MAF160C-0200-FQ-M2-FG0-05-N1 is an asynchronous drive motor manufactured by Bosch Rexroth Indramat for the MAF IndraDyn Asynchronous Motors series. Classified as a liquid-cooled asynchronous housing motor, it supplies controlled torque to continuous-duty production lines where internal heat is removed through an integrated cooling jacket. The unit uses frame size 160 with length code C, and its flange mounting face allows direct coupling to gearboxes or machine plates. Compliance with DIN EN 60034-14 supports installation in standardized industrial layouts.

At its nominal operating point, the rotor reaches 2000 rpm, matching the 0200 winding and the motor's standard bearing arrangement. Heat is removed by liquid coolant that enters through a connection thread with a port dimension of 1/2 inch, so matching hoses can be fitted without adapters. A plain shaft with a shaft sealing ring transmits torque while helping keep coolant and contaminants away from internal components. Position feedback is delivered by a multi-turn absolute encoder that offers 2048 increments of resolution, communicates over EnDat2.1, and is powered from 7 to 12 V supplied by the drive. This feedback arrangement allows the controller to recover absolute rotor position after power cycling without a separate homing routine.

The liquid circuit keeps the stator temperature within an ambient air range of 0 to 40 °C. Electrical insulation is rated class F, and the housing carries an IP65 protection class, so dust ingress and low-pressure water jets do not impair operation. The vibration severity meets level A, which suits balanced operation in precision machinery. Because the motor is supplied without a holding brake, any static load must be secured by external mechanisms. This arrangement is suitable for systems that already use external holding devices or drive-applied torque at standstill.