Product Description:

The MAF160C-0200-FQ-M2-EP1-35-N1 is a liquid-cooled asynchronous housing motor produced by Bosch Rexroth Indramat for the MAF IndraDyn Asynchronous Motors series. With frame size 160 and length code C, it is intended for flange or foot mounting on automated lines where stable force delivery is required at rated speed. An electrically released holding brake supports load retention when needed, and the built-in multi-turn absolute encoder supplies position feedback so coordinated axes in transfer systems stay aligned.

The motor reaches a rated speed of 2000 rpm, giving drive systems predictable velocity scaling when paired with inverters. During standstill or vertical loads, the brake supplies a holding torque of 100 Nm, so external clamping devices are unnecessary. Coolant enters through a connection thread that uses a 1/2 inch port, which simplifies linking the internal jacket to plant chillers. The shaft uses a keyway for torque transmission and is balanced with a full key, while standard bearings support the rotating assembly. Encoder data travel over the EnDat2.1 serial interface, and the sensor resolves shaft angle into 2048 increments while operating from a 7 to 12 V supply.

Ingress protection is rated at IP65, so dust and low-pressure water jets cannot reach live parts, and the windings use insulation class F for continuous-duty thermal endurance. The motor tolerates ambient temperatures from 0 to 40 °C and complies with vibration level A under DIN EN 60034-14. A turnable terminal box on the A-side houses the power connectors and allows flexible cable orientation without stressing conduits. A shaft sealing ring protects the internal lubrication, and the foot-and-flange base matches the winding code 0200 stator set. The liquid-cooling arrangement supports use in temperature-controlled drive modules that require consistent mechanical behavior under process-driven loads.