Product Description:

The MAF160C-0200-FQ-M2-EP1-05-V1 is an asynchronous housing motor produced by Bosch Rexroth Indramat within the MAF IndraDyn Asynchronous Motors series. Designed for industrial automation, it converts electrical energy into rotational motion for conveyors, extruders, and other continuous-duty stations where compact size and controlled thermal behavior are required. This motor type is suited to equipment that runs for long periods and must keep output stable as process loads change. Its enclosed housing also fits machine layouts that need reliable heat removal without adding external airflow hardware.

At its rated speed of 2000 rpm, the motor dissipates losses through liquid cooling. Coolant enters and exits through a 1/2 inch connection thread, allowing closed-loop temperature control without external fans. The flange-mounted housing follows insulation class F and maintains IP65 protection, so internal components stay isolated from dust and water jets. An electrically released brake generates 100 Nm of static holding torque, securing vertical axes when power is removed. The stator winding marked 0200, together with the 160 frame size and C length, supports continuous duty within an ambient range of 0 to 40 °C. An A-side, rotatable terminal box simplifies power connection while keeping the enclosure compact.

Long-term service life is supported by reinforced bearings that comply with the DIN EN 60034-14 vibration limit A, allowing the shaft to handle moderate radial loads. The shaft is balanced with a complete key and is protected by a sealing ring and keyway. Position and speed feedback are supplied by a multi-turn absolute encoder with a resolution of 2048 increments. This device communicates through the EnDat2.1 interface and operates from a supply of 7-12 V, giving the drive controller real-time data for closed-loop control. The absolute feedback format also helps the control system retain accurate position information during normal machine operation.