Product Description:

The MAF160C-0200-FQ-M2-EG1-35-N1 is manufactured by Bosch Rexroth Indramat and belongs to the MAF IndraDyn Asynchronous Motors series. Classified as a liquid-cooled asynchronous motor, it is built for drive tasks that need constant torque delivery with limited installation space. Integration into industrial automation lines is simplified by its flange and foot mounting design and by a power connection that can be rotated on the A-side of the housing. This layout supports installation in compact machine sections where mounting flexibility and stable motor output are both important.

This model attains a rated speed of 2000 rpm, allowing direct coupling to medium-speed machinery without external gear reduction. Thermal management is based on liquid cooling; coolant enters through a 1/2-inch connection thread, removing heat from the stator so full torque can be sustained at low airflow. Position feedback is handled through an EnDat2.1 interface tied to a multi-turn absolute encoder with 2048 increments, permitting high-resolution closed-loop control throughout the motor's service life. For static load holding, the electrically released brake supplies 100 Nm of torque, keeping the shaft locked when the inverter is de-energized. The housing carries an IP65 rating, preventing dust ingress and protecting internal components against water jets during washdown or coolant splash.

Ambient operating limits span 0 to 40 °C, and Class F insulation helps maintain winding integrity under those thermal conditions. A plain shaft with a shaft sealing ring minimizes leakage while accepting standard couplings in accordance with DIN EN 60034-14. Electrical terminations are made inside a turnable terminal box, letting installers orient conduits for minimal cable strain. The encoder supply voltage is 7 to 12 V. The motor uses a standard bearing arrangement, has vibration level A, and pairs frame size 160 with length code C and winding code 0200.