Product Description:

The MAF160C-0200-FQ-M2-EG0-35-N4 is a liquid-cooled asynchronous housing motor manufactured by Bosch Rexroth Indramat for the MAF IndraDyn Asynchronous Motors series. Used as a torque source for conveyor drives, extruders, and other continuous-duty equipment, the unit converts electrical energy into controlled shaft rotation while rejecting heat through an internal coolant circuit. Its compact frame and integrated sensors allow it to fit into densely packed automation cells without external ventilators.

Its mechanical speed rating is 2000 rpm, allowing the rotor to match common 4-pole, 50/60 Hz drive outputs without overspeed. Continuous heat is removed by the integrated liquid cooling jacket, which is coupled to a 1/2-inch connection thread so the motor can be placed in sealed enclosures. A sealing system rated IP65 prevents dust ingress and low-pressure water jets from reaching the stator. Position data is handled by a multi-turn absolute sensor that communicates through EnDat2.1 at a supply of 7-12 V, and its resolution of 2048 increments supports fine velocity control under closed-loop regulation. The motor has frame size 160, length code C, and winding code 0200, while a standard bearing set and vibration grade C help maintain smooth rotation. Power enters from the A-side, and the housing supports flange and foot mounting.

The drive side remains secure because the plain shaft is protected by a shaft sealing ring that helps block coolant or oil from migrating into the bearing cavity. For installations that rely on mechanical load holding rather than electromagnetic clamping, the motor is supplied without a holding brake. Terminations are made inside a turnable terminal box, allowing the conduit entry to be rotated for alignment with cabinet layouts. Operation is permitted within 0 to 40 °C, and the F-class insulation system withstands internal winding temperatures up to 155 °C under these ambient conditions.