Product Description:

The MAF160C-0200-FQ-M2-EG0-05-N1 is a liquid-cooled asynchronous housing motor from Bosch Rexroth Indramat and is included in the MAF IndraDyn Asynchronous Motors series. It is intended for automated production lines where high continuous output and compact installation space are required. By combining an external liquid circuit with a sealed housing, the motor maintains consistent thermal conditions and supports precision speed control in demanding industrial environments.

Heat is removed through liquid cooling that circulates behind the stator jacket. This thermal path allows operation at a rated speed of 2000 rpm without exceeding the insulation class F temperature limit. The motor carries protection class IP65, and a shaft sealing ring works with a plain shaft to help keep coolant and contaminants outside the standard bearing arrangement. The 160 frame size with frame length code C sets the housing geometry and matches vibration level A. Electrically, winding code 0200 identifies the stator layout, while a multi-turn absolute encoder delivers 2048 increments of feedback resolution to the drive. The permissible ambient temperature range is 0 °C to 40 °C when the rotatable terminal box is positioned toward the A-side power entry.

The liquid circuit connects through a connection thread of 1/2 inch, which simplifies hose adaptation on closed cooling skids. The housing uses flange mounting, so alignment to gearboxes or pump heads follows standard IEC footprints. Position data moves to the controller over the EnDat2.1 interface. The encoder electronics draw 7–12 V from the drive, eliminating the need for an external supply. The motor is delivered without a holding brake, so dynamic stopping must be handled by the inverter. Compliance with DIN EN 60034-14 confirms the stated vibration limits for general-purpose industrial machines.