MAF160C-0200-FQ-C0-KH0-35-N1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911315896
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MAF160C-0200-FQ-C0-KH0-35-N1 is part of the MAF IndraDyn Asynchronous Motors series. This liquid-cooled asynchronous motor features both flange and foot mounting, a plain shaft, standard bearings, and an IP65 protection class. It uses an incremental encoder with 2048 increments resolution and operates at a rated speed of 2000 min-1.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MAF160C-0200-FQ-C0-KH0-35-N1 is an asynchronous housing motor built by Bosch Rexroth Indramat and assigned to the MAF IndraDyn Asynchronous Motors series. It delivers continuous rotary power for conveyor sections, presses, and similar automation equipment that operates in confined cabinets where air circulation is limited. Its design follows DIN EN 60034-14 vibration guidelines, and the model’s C length code provides a medium active core within the 160 frame size, balancing torque density and installation depth.
At a rated speed of 2000 rpm, the rotor reaches its nominal operating speed when supplied through the matched drive inverter, making the motor suitable for mid-range line rates without excessive frequency demand. Heat removal is handled by a liquid cooling circuit that flows directly through the stator jacket. This permits full-load operation even inside sealed machine frames. An enclosure rating of IP65 prevents dust ingress and withstands directed water jets, so the external surface can be washed down during maintenance. Rotor position feedback is produced by an incremental encoder that delivers 2048 increments per revolution, enabling precise speed control in closed-loop systems. Coolant enters and leaves through a threaded interface sized at 1/2 inch, allowing standard industrial hose fittings.
The encoder electronics draw 5 V from the drive, so shielded low-voltage cabling is adequate for signal integrity. Reliable service is maintained in ambient temperatures from 0 to 40 °C, which matches common shop-floor conditions without normal derating. Class F insulation protects the windings against internal hot-spot temperatures, helping support long service life when duty cycles fluctuate. Mechanical balance is verified to vibration grade A. The motor has a plain shaft, standard rolling bearings, no holding brake, and no shaft sealing ring, which reduces friction and simplifies periodic inspection. The flange and foot mounting pattern secures the motor to welded baseplates.
Frequently Asked Questions about MAF160C-0200-FQ-C0-KH0-35-N1:
Q: What type of encoder and resolution does the MAF160C-0200-FQ-C0-KH0-35-N1 use?
A: This model uses a 2048-increment incremental encoder for position feedback.
Q: What cooling method is employed in the MAF160C-0200-FQ-C0-KH0-35-N1 motor?
A: The MAF160C-0200-FQ-C0-KH0-35-N1 motor is cooled using a liquid cooling system.
Q: What is the permissible ambient temperature range for the MAF160C-0200-FQ-C0-KH0-35-N1?
A: This motor is rated for operation in ambient temperatures between 0 and 40 °C.
Q: What kind of shaft configuration does the MAF160C-0200-FQ-C0-KH0-35-N1 have?
A: A plain shaft without a shaft sealing ring is used in this motor.
Q: What level of environmental protection is offered by the MAF160C-0200-FQ-C0-KH0-35-N1?
A: The protection class of this motor is IP65, providing protection against dust and water jets.
