MAF160C-0200-FQ-C0-HG0-05-N1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911404892
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MAF160C-0200-FQ-C0-HG0-05-N1 is part of the MAF IndraDyn Asynchronous Motors series and uses a liquid cooling system with a 1/2 inch connection thread. This flange mounted motor features IP65 protection, a plain shaft with a shaft sealing ring, and insulation class F. It operates with an incremental encoder at 2048 increments resolution and has a rated speed of 2000 min-1.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MAF160C-0200-FQ-C0-HG0-05-N1 asynchronous motor is produced by Bosch Rexroth Indramat for the MAF IndraDyn Asynchronous Motors series. In an automated cell, it operates as a constant-speed drive that converts inverter output into mechanical rotation for conveyors, extruders, and similar equipment. Because magnetic excitation is created in the stator windings rather than through permanent magnets, it accommodates the thermal and load variations normally seen in general-purpose industrial motion systems. Its asynchronous design also suits applications that require durable operation under changing process loads and extended running periods.
The motor body follows frame size 160 with length code C, and a rigid interface for flange mounting secures it directly to the machine plate. The motor is sealed to IP65, so dust intrusion and water jets do not reach the windings or the standard rolling bearings. Heat is removed through liquid cooling; coolant enters a 1/2-inch thread on the housing and exits through a matching connection. The internal three-phase winding uses insulation class F and code 0200, and it is suited to a rated shaft speed of 2000 rpm. Power conductors reach the stator through a rotatable terminal box on the B-side, simplifying cable routing. A 5-volt rail in the box feeds the incremental feedback system, and that supply is maintained at 5 V by the associated drive. Standard vibration level A and compliance with DIN EN 60034-14 support balanced operation.
Position feedback is delivered by an incremental encoder that resolves the shaft into 2048 increments, enabling closed-loop speed control when paired with the drive. This feedback allows the control loop to correct speed deviations during acceleration and under changing process demand. The rotor is machined as a plain shaft and protected by a shaft-sealing ring to keep lubricant inside the motor. Operation is specified for ambient temperatures between 0 to 40 °C, and the unit is supplied without a holding brake, so mechanical locking must be provided externally if required.
Frequently Asked Questions about MAF160C-0200-FQ-C0-HG0-05-N1:
Q: What cooling method does the MAF160C-0200-FQ-C0-HG0-05-N1 motor use?
A: This motor uses liquid cooling, which helps maintain stable operating temperatures during continuous operation.
Q: What type of encoder and resolution does the MAF160C-0200-FQ-C0-HG0-05-N1 feature?
A: The encoder on this motor is incremental with 2048 increments for precise feedback.
Q: Does the MAF160C-0200-FQ-C0-HG0-05-N1 motor include a holding brake?
A: This model operates without a holding brake, so it does not provide shaft locking when unpowered.
Q: How is the power connection configured on the MAF160C-0200-FQ-C0-HG0-05-N1 motor?
A: The power connection uses a turnable terminal box positioned on the B-side for flexible installation.
Q: What kind of shaft design does the MAF160C-0200-FQ-C0-HG0-05-N1 motor have?
A: The shaft is a plain type and features a shaft sealing ring to help protect against contaminants.
