Product Description:

Bosch Rexroth Indramat manufactures the MAF160C-0200-FQ-C0-FK0-05-N1, an asynchronous housing motor in the MAF IndraDyn Asynchronous Motors series. As a drive element, it supplies controlled mechanical power to machine tools, packaging equipment, and material-handling stations that need precise speed regulation within automated lines. It is intended for variable-speed applications where stable torque delivery and reliable drive feedback are important during continuous operation.

The motor uses liquid cooling circulated through a connection thread sized 1/2 inch. This arrangement draws heat directly from the stator so full torque can be maintained even in compact cabinets. A rated speed of 2000 rpm aligns with mid-range inverter outputs common in production plants, while the housing seals meet the IP65 protection class to block dust and low-pressure water jets. Position feedback is supplied by an incremental encoder that generates 2048 increments per revolution and is powered from a 5 V source, allowing standard drive controllers to monitor rotor position. The windings follow insulation class F and vibration level A, and the rotor complies with DIN EN 60034-14 balance rules that use a half-key reference. A winding identifier of 0200 and the standard bearing arrangement complete the electromagnetic and mechanical setup.

Installation is by flange mounting, which centers the 160 frame motor with length code C without external foot hardware. Operation is permitted in ambient air from 0 to 40 °C, and liquid sealing is reinforced by a shaft sealing ring that works with the keyway-machined shaft to help prevent coolant ingress. The shaft is balanced with a half key to reduce radial loading on connected couplings. Because the design is supplied without a holding brake, any static load must be secured by the drive or an external mechanical lock.