Product Description:

The MAF160C-0200-FQ-C0-FH0-35-N1 is an asynchronous drive motor produced by Bosch Rexroth Indramat for the MAF IndraDyn Asynchronous Motors series. It is a liquid-cooled housing motor intended for automated equipment that requires continuous torque without excessive frame heating. In service, it converts electrical power into controlled rotary motion for conveyors, process lines, and other driven axes. A standard rolling-element bearing set supports the rotor during sustained operation, and the 160 frame with C length fits machine layouts that are sized for this motor envelope. Liquid heat removal also helps the housing maintain stable operating conditions when the motor is installed in enclosed machine spaces.

This model uses liquid cooling, and the coolant connection is threaded to 1/2 inch for direct plumbing to a closed-loop chiller circuit. Electrical feedback is provided by an incremental encoder with 2048 increments per revolution, and the encoder electronics operate from a stable 5 V supply. The feedback system is protected to IP65, which helps keep dust and low-pressure water spray away from the signal tracks. The motor uses combined flange and foot mounting for flexible installation. It also has a plain shaft and is supplied without a shaft sealing ring or holding brake.

The stator is rated for a nominal speed of 2000 rpm, and the thermal design supports ambient air from 0–40 °C during normal operation. Mechanical balancing and vibration behavior follow DIN EN 60034-14, which helps limit structural excitation in surrounding machinery. Winding code 0200 identifies the motor's electrical configuration, and Class F insulation is used in the stator winding. This combination works with incremental encoder feedback for closed-loop vector control. It also supports stable speed regulation when the load changes during continuous-duty operation.