Product Description:

The MAF160C-0200-FQ-C0-EH0-05-N1 is an asynchronous housing motor produced by Bosch Rexroth Indramat as part of the MAF IndraDyn Asynchronous Motors series. It supplies regulated mechanical power to automated machinery when operated from an external frequency inverter, making it suitable for continuous-duty industrial motion tasks. This configuration supports use in enclosed production equipment where stable speed and torque are required over long operating periods. The motor uses frame size 160 with length code C, and its design includes a turnable terminal box on the A-side so the power entry can be oriented to suit the cable route without disturbing the enclosure seal.

Process heat is removed by liquid cooling, and the stator jacket has a dedicated connection thread so chilled water can circulate directly around the windings. The cooling port uses a 1/2 inch interface, which matches common machine plumbing. With this arrangement, the enclosure maintains an IP65 rating that helps keep dust and washdown moisture away from active parts. Under nominal frequency, the rotor reaches 2000 rpm. Rotor position is monitored by an incremental encoder with 2048 increments per revolution, and the sensor operates from a 5 V supply with TTL-compatible output signals for the drive controller.

The stator insulation is rated to class F, which supports the winding temperatures expected in this cooling arrangement. Mechanical installation is supported by flange mounting, and the permitted ambient temperature range of 0–40 °C allows the motor to operate within its intended thermal conditions. The motor uses a plain shaft without a shaft sealing ring, so external sealing may be needed where fluids are present. The design does not include a holding brake, uses standard deep-groove bearings, and complies with DIN EN 60034-14 vibration level A. Electrical performance follows winding code 0200 for the rated speed and torque behavior of this motor.