Product Description:

The MAF160C-0150-FQ-S2-FQ0-35-N1 is a liquid-cooled asynchronous housing motor built by Bosch Rexroth Indramat for the MAF IndraDyn Asynchronous Motors series. Serving as a drive element in industrial automation, it converts electrical power into regulated rotary motion for conveyors, packaging lines, and forming equipment. As an asynchronous housing motor, it is suited to applications that require durable continuous rotation in production machinery. Continuous coolant flow around the stator lets heat leave through the frame, so the motor can fit in compact machine spaces without depending on forced air. This cooling method shifts thermal management to the coolant circuit instead of relying on surrounding air movement.

At its rated speed of 1500 rpm, the rotor delivers nominal output that matches the 0150 winding used on this version. Heat is removed through liquid cooling, and coolant enters through a connection thread at a 1/2 inch port to help maintain stable temperature in ambient conditions from 0 to 40 °C. The motor uses flange and foot mounting, and standard rolling bearings support radial loads during operation. Feedback comes from a single-turn absolute encoder with EnDat 2.1 communication, a resolution of 2048 increments, and an electronics supply of 7–12 V. This feedback allows the drive to monitor shaft position accurately for controlled speed regulation and coordinated machine motion. The output shaft is balanced and uses a full keyway for torque transmission, and the motor comes without a holding brake or shaft sealing ring.

The enclosure is certified to IP65, protecting the interior against dust and water jets in industrial areas. Electrical insulation meets Class F limits, and dynamic behavior satisfies vibration level A according to DIN EN 60034-14. The motor has a frame size of 160 with frame length C, which helps match it to gearboxes or couplings that use the same pilot diameter. Frame length C also sets the axial length of this build, which is useful when checking surrounding space near couplings and mounting surfaces.