Product Description:

The MAF160C-0150-FQ-S2-FK0-35-R1 is a liquid-cooled asynchronous housing motor built by Bosch Rexroth Indramat as part of the MAF IndraDyn Asynchronous Motors series. In automated production cells, this motor supplies regulated rotary power for conveyors, extruders, and other continuous-duty axes that must dissipate heat efficiently while staying within compact mechanical envelopes. Its asynchronous design makes it suitable for applications that need steady rotary output and dependable thermal management during long operating cycles.

Heat is removed through liquid cooling that circulates through a connection thread sized at 1/2 inch, so plumbing can be tied directly to machine coolant manifolds. The housing carries a protection rating of IP65, allowing installation where dust and low-pressure washdown are expected. At its rated speed of 1500 rpm, the 160-frame motor with length code C operates with winding code 0150, which identifies the electrical characteristics matched to the associated drive. Flange and foot mounting allow either face or base installation, while half-key balancing and a shaft sealing ring help protect the bearing set. The windings use Class F insulation, providing thermal margin under the 0.4 kW loss load handled by the cooling circuit.

Position feedback is provided by a single-turn absolute encoder that communicates via EnDat2.1. Its resolution of 2048 increments supports fine velocity correction when the drive operates in closed-loop mode, and encoder power is supplied through the main connector from a 7 to 12 V source. Operation is permitted at ambient temperatures from 0 to 40 °C, and the motor meets mechanical vibration requirements in DIN EN 60034-14. The motor does not include a holding brake, so any required static holding torque must come from an external clamp or the drive’s torque mode.