MAF160C-0150-FQ-S2-ER0-35-A1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911377807
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MAF160C-0150-FQ-S2-ER0-35-A1 is part of the MAF IndraDyn Asynchronous Motors series and features flange and foot mounting with a frame size of 160. This motor uses liquid cooling with a 1/2 inch connection thread and is protected to IP65. It is equipped with a single-turn absolute encoder with 2048 increments and an EnDat2.1 interface, and has a rated speed of 1500 min-1.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MAF160C-0150-FQ-S2-ER0-35-A1 asynchronous motor is manufactured by Bosch Rexroth Indramat within the MAF IndraDyn Asynchronous Motors series. Intended for closed-loop industrial drive tasks, the housing integrates liquid channels so the machine can deliver steady torque in confined cabinets and densely packed equipment bays. As a liquid-cooled housing motor, it couples directly to frequency inverters and serves as a primary mover for conveyors, extruders, and machine-tool spindles where constant speed control and compact installation are required. Its mechanical interface uses common flange and foot patterns for installation in standard IEC-style mounting arrangements, which helps it fit established machine layouts in industrial installations.
Heat is removed through liquid cooling, and the channels terminate in a connection thread sized 1/2 inch, letting standard hydraulic fittings attach without adapters. Rotor position is reported by a single-turn absolute encoder that offers 2048 increments of resolution, which supplies fine velocity feedback to the drive during speed-controlled operation. Data and power for the sensor are exchanged over the EnDat2.1 interface so the controller can read position and diagnostic registers with minimal latency. An enclosure rating of IP65 seals the stator against dust ingress and water jets, permitting installation next to coolant spray or cutting fluids in demanding industrial environments.
At nominal line frequency, the motor reaches 1500 rpm while maintaining smooth torque because the rotor is balanced with a complete key and supported by an A-sided fixed bearing. The windings use F insulation, allowing conductor temperatures up to 155 °C and supporting long service life during repeated thermal cycling. A labyrinth seal on the shaft minimizes fluid egress from the housing and protects the bearing grease from contamination. Reliable operation is permitted in ambient temperatures from 0 to 40 °C, so the unit can be mounted inside standard control cabinets or directly on the machine base without additional climate control.
Frequently Asked Questions about MAF160C-0150-FQ-S2-ER0-35-A1:
Q: What type of cooling does the MAF160C-0150-FQ-S2-ER0-35-A1 motor use?
A: This model features a liquid cooling system with a 1/2 inch connection thread.
Q: What encoder interface and resolution are available on the MAF160C-0150-FQ-S2-ER0-35-A1 motor?
A: The MAF160C-0150-FQ-S2-ER0-35-A1 supports an EnDat2.1 encoder interface with a resolution of 2048 increments.
Q: Does the MAF160C-0150-FQ-S2-ER0-35-A1 include a holding brake?
A: This model does not have a holding brake installed.
Q: What is the protection class of the MAF160C-0150-FQ-S2-ER0-35-A1 motor?
A: The protection class for this motor is IP65, which means it is dust tight and protected against water jets.
Q: What mounting style does the MAF160C-0150-FQ-S2-ER0-35-A1 motor use?
A: It is designed for flange and foot mounting, providing flexibility during installation.
