MAF160C-0150-FQ-S2-EH0-05-N1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911409202
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MAF160C-0150-FQ-S2-EH0-05-N1 is part of the MAF IndraDyn Asynchronous Motors series and features a flange mounting style with a frame size of 160. This liquid-cooled asynchronous motor supports an EnDat2.1 encoder interface with a resolution of 2048 increments and an insulation class of F. It has a protection class of IP65, a rated speed of 1500 min-1, and uses a plain shaft without shaft sealing.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MAF160C-0150-FQ-S2-EH0-05-N1 liquid-cooled induction unit is produced by Bosch Rexroth Indramat for the MAF IndraDyn Asynchronous Motors series. Supplied in frame size 160 with length code C, this flange-mounted housing motor serves regulated drive axes where a compact envelope, high continuous torque, and stable thermal behavior are required. Standard rolling bearings support the plain shaft, and a turnable A-side terminal box simplifies alignment of power leads inside a cabinet. Because the design omits a holding brake and a shaft sealing ring, any static load locking or additional sealing must be handled by the surrounding machinery.
Heat produced by the stator is removed through liquid cooling, which circulates through a connection thread sized 1/2 inch; this arrangement permits closed-loop coolant circuits and stable winding temperatures. The motor incorporates an EnDat2.1 single-turn absolute encoder that offers 2048 increments of resolution and operates on a supply of 7-12 V, giving the drive system absolute rotor angle data at power-up and during closed-loop operation. An enclosure rating of IP65 protects internal components against dust and directed water jets, while insulation class F tolerates elevated winding temperature. Vibration grade A keeps structural excitation low, and winding code 0150 indicates the stator configuration used for this motor.
The motor reaches a rated mechanical speed of 1500 rpm, matching common 50 Hz line frequencies and supporting vector-controlled inverters in constant-speed applications. Continuous service is specified for ambient conditions between 0 to 40 °C, so additional panel ventilation is only necessary when the installation site exceeds this range. Mechanical vibration and balance profiles comply with DIN EN 60034-14, and the water-jacketed housing helps limit thermal drift and bearing fatigue during prolonged cycles. This operating range suits enclosed machinery as long as site conditions remain within the stated limits.
