Product Description:

The MAF160C-0150-FQ-S0-KK0-35-N1 is an asynchronous motor produced by Bosch Rexroth Indramat as part of the MAF IndraDyn Asynchronous Motors series. The unit is built as a liquid-cooled housing motor that supplies regulated mechanical power to automated presses, extruders, and conveyor modules where low heat rise inside the machine frame is important for process stability. Because the motor is supplied without a holding brake, static loads must be managed by external locking devices.

This model has a rated speed of 1500 rpm, which aligns with 50 Hz line frequency and simplifies drive sizing in systems that use standard supply converters. A sealed aluminum frame carries an IP65 enclosure rating, keeping dust and water jets away from the internal windings during routine washdown cycles. The stator insulation is class F, which permits winding temperatures up to 155 °C without dielectric breakdown. Liquid circulation passes through a connection thread that accepts a 1/2 inch fitting, and this closed loop removes heat from the winding area to maintain continuous torque under high duty. The motor is intended for ambient conditions from 0 to 40 °C, so cabinet ventilation is unnecessary as long as the surrounding air stays within that range.

The shaft is balanced with half key, which helps limit radial forces on coupled equipment while still allowing straightforward alignment. Compliance with DIN EN 60034-14 keeps vibration in class A, which helps preserve bearing life during long production runs. Frame size 160 with the C length code gives the motor a moderate footprint for flange or foot mounting, and a shaft sealing ring helps block lubricant escape at the drive end. Standard bearings support continuous operation, and winding code 0150 indicates the electrical characteristics used with matching IndraDrive inverters.