MAF160C-0150-FQ-M2-EP1-05-V1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911371544
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MAF160C-0150-FQ-M2-EP1-05-V1 is part of the MAF IndraDyn Asynchronous Motors series and features reinforced bearings and liquid cooling with a 1/2 inch cooling thread connection. This flange mounted motor comes with a multi-turn absolute encoder using EnDat2.1 interface and delivers a holding torque of 100 Nm. It offers IP65 protection class, insulation class F, and operates at a rated speed of 1500 min-1.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MAF160C-0150-FQ-M2-EP1-05-V1 asynchronous motor is manufactured by Bosch Rexroth Indramat and belongs to the MAF IndraDyn Asynchronous Motors series. It is a liquid-cooled housing unit designed to deliver continuous mechanical power to industrial automation cells. It supports stable speed regulation and compact installation through flange mounting on machine frames.
Liquid heat removal is achieved through liquid cooling that enters and exits the stator jacket via a connection thread; the port is specified as 1/2 inch and supports direct hose adapters. Reinforced bearings withstand higher radial loads, while the shaft is equipped with a sealing ring and a keyway that is balanced with the complete key to meet vibration level A under DIN EN 60034-14. The terminal box on the A-side can be rotated so the power connection can be aligned with site cabling. Encoder feedback relies on a 7-12 V supply, communicates through EnDat2.1, and provides 2048 increments of multi-turn absolute position, allowing the controller to index the motor without a homing cycle. Frame identification uses size 160, length code C, and winding code 0150.
Dynamic holding is provided by an electrically released brake that delivers 100 Nm of torque to secure vertical or overhauling loads when power is removed. Under drive control, the rotor can reach a rated speed of 1500 rpm, with Class F insulation managing the temperature rise in the windings. The enclosure is sealed to IP65, and a shaft sealing ring prevents coolant or process fluid from entering the bearing chamber. Operation is specified within an ambient air temperature range of 0 to 40 °C, so ventilation around the machine must maintain this window. Flange mounting, a turnable terminal box, and the balanced keyway simplify mechanical integration, while reinforced bearings and vibration level A support stable running.
