Product Description:

The MAF160C-0100-FQ-S2-HQ0-05-V1 is a liquid-cooled asynchronous housing motor produced by Bosch Rexroth Indramat for the MAF IndraDyn Asynchronous Motors series. It is intended for continuous-duty drive tasks in industrial automation where stable torque, compact installation, and efficient heat removal are required. This motor format is well suited to enclosed machinery where external airflow is limited and stable thermal behavior is important during long operating cycles. Its housing layout helps the unit fit into machines that need a compact motor envelope without sacrificing sustained output. A turnable terminal box on the B-side lets the power leads be oriented to fit the available cabinet and machine layout.

The motor’s rated speed is 1000 rpm, and this operating point is matched to winding code 0100 to keep electrical losses controlled at nominal load. Liquid cooling removes heat from the stator through a jacket with a connection thread that accepts a 1/2 inch fitting for closed coolant circuits. Because heat is carried away by coolant rather than ambient air alone, the motor can be installed in tighter spaces around other heat-producing components. Position data are delivered by a single-turn absolute encoder with an EnDat 2.1 interface, offering a native resolution of 2048 increments and operating from a supply of 7–12 V. That feedback arrangement lets the connected drive monitor rotor position directly during startup and speed regulation. The enclosure is rated IP65, and the motor is supplied without a holding brake when static torque retention is not required.

The thermal system is supported by Class F insulation, which tolerates winding temperatures associated with high current density. Mechanical attachment uses flange mounting, and reinforced bearings absorb radial and axial forces while keeping vibration within Grade A. The bearing arrangement supports shaft loading encountered in general industrial motion systems. The rotor is balanced with a complete key, and the keyed shaft is supplied without a sealing ring to reduce friction in liquid-cooled assemblies. Frame size 160 with length code C provides a compact footprint, and the motor follows DIN EN 60034-14 for vibration limits while operating in ambient temperatures from 0 °C to 40 °C.