Product Description:

The MAF160C-0100-FQ-S2-HH0-05-H1 belongs to the MAF IndraDyn Asynchronous Motors series from Bosch Rexroth Indramat. It is a liquid-cooled asynchronous housing motor used to drive conveyors, pumps, or process equipment where stable torque is needed under continuous duty. The design combines flange-mounted stators with onboard feedback so the unit can be used with frequency inverters for closed-loop speed regulation in automated lines.

A rated speed of 1000 rpm sets the mechanical reference for drive tuning, and the high-speed bearing arrangement limits radial runout at that velocity. The winding code 0100 matches the stator geometry of the 160 mm frame to achieve the required magnetizing current. Heat is removed through liquid cooling, and the housing carries a 1/2-inch connection thread that links to an external chiller without additional manifolds. An EnDat 2.1 interface forwards position data from the single-turn absolute encoder, whose supply voltage ranges from 7 to 12 V and whose resolution is 2048 increments, enabling fine velocity control. The motor housing is sealed to IP65, so coolant fittings and terminals remain protected against dust and water jets during washdown cycles.

Installation details include flange mounting that conforms to DIN EN 60034-14 and keeps alignment accurate across the C-length housing. Power enters on the B-side through a turnable terminal box, so the conduit can be aimed in any direction inside crowded cabinets. The winding insulation is class F, allowing a higher temperature rise while staying within the permissible ambient range of 0 to 40 °C. A plain shaft is supplied without a shaft-sealing ring, and the motor is delivered without a holding brake to simplify maintenance of external couplings. Vibration level A supports smooth interaction with precision gearboxes, and the absence of internal braking parts keeps the mass moment of inertia low.