Product Description:

The MAF160C-0100-FQ-S2-FK0-35-N1 motor is produced by Bosch Rexroth Indramat and belongs to the MAF IndraDyn Asynchronous Motors series. It supplies regulated mechanical power for conveyor, forming, and process equipment within automated cells where constant torque and low operating speed are required. The asynchronous rotor geometry allows the unit to pair with variable-frequency inverters for closed-loop speed control in industrial automation.

Liquid cooling is routed through a dedicated jacket, and the medium enters and leaves through a connection thread sized 1/2 inch. This keeps the stator at a stable temperature so the motor can sustain its rated speed of 1000 rpm without derating. The housing is sealed to IP65, blocking dust ingress and high-pressure water during washdown. Mechanical coupling is simplified by flange and foot mounting, a shaft with a keyway, and balancing with a half key to minimize residual vibration. A standard rolling-element bearing set supports the rotor, while a shaft sealing ring limits coolant or oil migration. The motor has a frame size of 160 with length code C, and winding code 0100 identifies the electrical configuration used for this speed class. Position feedback enters the drive through an EnDat2.1 interface housed in the encoder connector.

The single-turn absolute encoder delivers 2048 increments per revolution and is powered from 7–12 V, supplying the controller with precise rotor angle data for vector control. Operation is permitted in ambient temperatures of 0–40 °C, and a Class F insulation system withstands the internal winding temperature that accompanies continuous duty within that range. Because the motor is supplied without a holding brake, external clamping devices are required if the load must be secured at standstill. Compliance with DIN EN 60034-14 and vibration level A limits supports low mechanical noise and simplified alignment with nearby precision machinery.