MAF160C-0100-FQ-S2-BH0-35-N3 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911336989
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MAF160C-0100-FQ-S2-BH0-35-N3 is part of the MAF IndraDyn Asynchronous Motors series and features a liquid cooling system with a 1/2 inch connection thread. This motor includes a 2048 increment EnDat2.1 single-turn absolute encoder operating at 7-12 V, and offers flange and foot mounting with an IP65 protection class. It has a rated speed of 1000 min-1 and complies with the DIN EN 60034-14 standard.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MAF160C-0100-FQ-S2-BH0-35-N3 is an asynchronous motor designed by Bosch Rexroth Indramat and supplied within the MAF IndraDyn Asynchronous Motors series. Built as a liquid-cooled housing motor, it converts electrical power into controlled rotary motion for conveyors, extruders, and other automated machinery that must run continuously at moderate speed while remaining thermally stable. Integration into industrial frames is simplified by a flange-and-foot base, and the power connector is positioned on the B-side to streamline cabinet wiring. This layout helps the motor fit machine builds that need secure mounting and orderly cable routing around adjacent equipment.
The motor uses liquid cooling, which circulates through an internal jacket and removes heat directly from the stator so full torque can be maintained without external airflow. Its housing carries an IP65 protection rating, which helps seal the windings against dust ingress and low-pressure water jets during washdown maintenance. A rated speed of 1000 rpm is used for nominal operation under the intended frequency and load conditions. Position feedback is provided by a single-turn absolute encoder delivering 2048 increments, and this transducer communicates to the drive over the EnDat2.1 digital interface for direct position reporting and high-resolution velocity control. Because the feedback system is integrated, the motor can support stable speed regulation and accurate rotor position tracking during load changes.
The winding insulation meets class F, supporting the thermal demands that can occur when coolant flow is reduced or ambient heat is high. Mechanical balance conforms to vibration level B, which helps limit oscillations transmitted to attached gearboxes and fixtures during continuous rotation. Coolant access is provided through a threaded port sized at 1/2 inch, making the motor compatible with common hydraulic fittings used in closed-loop chillers. Operation is intended between 0 to 40 °C ambient temperature, allowing installation in standard shop environments without auxiliary enclosure heaters or blowers.
Frequently Asked Questions about MAF160C-0100-FQ-S2-BH0-35-N3:
Q: What type of cooling does the MAF160C-0100-FQ-S2-BH0-35-N3 motor use?
A: The MAF160C-0100-FQ-S2-BH0-35-N3 features liquid cooling with a 1/2 inch connection thread.
Q: What encoder is used in the MAF160C-0100-FQ-S2-BH0-35-N3 motor?
A: This motor includes a single-turn absolute encoder with EnDat2.1 interface and 2048 increments resolution.
Q: What is the rated speed of the MAF160C-0100-FQ-S2-BH0-35-N3 motor?
A: The rated speed for this model is 1000 min-1.
Q: Is the MAF160C-0100-FQ-S2-BH0-35-N3 motor equipped with a holding brake?
A: This motor is supplied without a holding brake.
Q: What is the protection rating of the MAF160C-0100-FQ-S2-BH0-35-N3 motor?
A: The protection class for this motor is IP65, suitable for harsh environments.
