MAF160C-0100-FQ-S2-BH0-05-N3 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911324370
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MAF160C-0100-FQ-S2-BH0-05-N3 is part of the MAF IndraDyn Asynchronous Motors series and features a liquid cooling system with a 1/2 inch connection thread. This motor uses a single-turn absolute encoder with EnDat2.1 interface and 2048 increments of resolution. It has a flange mounting style, an IP65 protection class, and operates at a rated speed of 1000 min-1.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MAF160C-0100-FQ-S2-BH0-05-N3 is an asynchronous housing motor manufactured by Bosch Rexroth Indramat for the MAF IndraDyn Asynchronous Motors series. It supplies steady rotary power for conveyor sections, extruders, and other continuous-duty axes in automated lines where ambient air cooling is impractical. Power is connected on the B-side through a sealed connector, which keeps the interface enclosed and supports orderly cable routing. The housing-style design also suits installations that need continuous operation without relying on external fan cooling around the motor body.
Heat generated in service is carried away by the motor’s liquid cooling circuit, so the housing can be used where ambient airflow is limited. The enclosure carries an IP65 rating, which blocks dust ingress and resists low-pressure water jets encountered on wash-down production floors. Rotor geometry allows a constant mechanical speed of 1000 rpm, which suits low-speed, high-torque processes. Positional data are transmitted through the digital EnDat 2.1 interface, and stable operation is permitted in ambient temperatures from 0 to 40 °C. The insulation system uses Class F materials for 155 °C winding endurance, while standard bearings, vibration level B balancing, and a fixed flange mounting face support steady operation.
The coolant enters and leaves through a threaded connection sized at 1/2 inch, which simplifies hose selection for a plant chilled-water circuit. Absolute position feedback is delivered by a single-turn encoder with 2048 increments per revolution and a supply voltage of 7 to 12 V, allowing low-voltage feedback wiring. Compliance with DIN EN 60034-14 confirms balance quality for industrial vibration limits. The motor has a smooth plain shaft without a shaft sealing ring, so external sealing is required if fluids can reach the drive end. It is supplied without a holding brake and relies on drive torque for static positioning, while frame size 160, frame length C, and winding code 0100 place it within the established series dimensions.
Frequently Asked Questions about MAF160C-0100-FQ-S2-BH0-05-N3:
Q: What type of encoder system does the MAF160C-0100-FQ-S2-BH0-05-N3 motor utilize?
A: This model uses a single-turn absolute encoder with EnDat2.1 interface and a resolution of 2048 increments.
Q: What type of cooling does the MAF160C-0100-FQ-S2-BH0-05-N3 support?
A: The cooling system on this motor is liquid cooling, connected via a 1/2 inch thread.
Q: Is a holding brake included with the MAF160C-0100-FQ-S2-BH0-05-N3 motor?
A: The MAF160C-0100-FQ-S2-BH0-05-N3 is manufactured without a holding brake.
Q: What is the mounting style of the MAF160C-0100-FQ-S2-BH0-05-N3 motor?
A: This motor features a flange mounting style for installation.
Q: What is the rated speed for the MAF160C-0100-FQ-S2-BH0-05-N3 motor?
A: The rated speed of this model is 1000 min-1.
