Product Description:

The MAF160C-0100-FQ-M2-FH0-35-N1 is produced by Bosch Rexroth Indramat as part of the MAF IndraDyn Asynchronous Motors series. Classified as a liquid-cooled housing motor, it serves drive systems in industrial automation by delivering steady torque while keeping thermal loads low. Integration of an absolute feedback system allows closed-loop positioning, supporting motion axes that require accurate speed and position control.

A closed liquid circuit removes stator heat through liquid cooling, and the medium is fed to the housing by a 1/2 inch connection thread, making installation simple when manifolds already use threaded couplings. The cooling port is a threaded connection, so no separate flange is required. Rotor movement is monitored by a multi-turn absolute encoder that communicates through EnDat2.1 and delivers 2048 increments per revolution; this device is powered from a 7–12 V supply provided by the drive controller. Because the motor is supplied without a holding brake, mechanical load retention must be handled elsewhere in the machine. Standard bearings support the shaft, and winding code 0100 sets the electrical characteristics used with matched inverters.

The rated speed is 1000 rpm, a value that aligns with the 160 mm frame size and the C length code to provide high torque at moderate speed. The casing carries an IP65 protection class, so dust ingress is prevented and water jets will not affect operation, even though the plain shaft is delivered without a shaft sealing ring. Flange and foot mounting options allow alignment with base plates or gearboxes, and the vibration level is grade A according to DIN EN 60034-14 for general-purpose machinery. Class F insulation tolerates winding temperatures up to 155 °C, while the permissible ambient range of 0 to 40 °C ensures compatibility with most shop-floor climates.