Product Description:

The MAF160C-0100-FQ-M2-BG0-35-N4 is a liquid-cooled asynchronous housing motor built by Bosch Rexroth Indramat for the MAF IndraDyn Asynchronous Motors series. Designed for conveyor sections, presses, and general handling equipment, it supplies steady torque at modest speed while keeping the frame temperature low. Integrated coolant passages make it suitable for tightly packed automation cells where airflow is limited. As an asynchronous housing motor, it is intended for use with a compatible drive that regulates speed and torque during machine operation.

Cooling is provided by liquid cooling through a 1/2 inch stainless coupling, and the coolant inlet uses a threaded connection that matches ISO pipe fittings. The closed EnDat2.1 feedback path carries position data from a multi-turn absolute encoder with 2048 increments per revolution and a supply voltage of 7–12 V. This arrangement gives the controller position information during startup and normal motion. The motor does not include a holding brake, and it uses a standard bearing arrangement with vibration level C. The motor has frame size 160 and length code C with winding code 0100. Flange and foot mounting are provided, and the power connector is located on the B-side so cabling can be routed away from the drive. Insulation class F materials protect the stator, and a shaft sealing ring helps prevent lubricant leakage.

The housing meets IP65, so dust and low-pressure water exposure on the factory floor do not compromise operation. At a rated speed of 1000 rpm, the rotor delivers constant torque suited for indexing duties and other steady-speed applications. Continuous service is specified for ambient conditions from 0 to 40 °C; outside this range, derating or additional conditioning is required. The drive end uses a plain shaft with a shaft sealing ring, allowing direct coupling through clamping hubs while maintaining enclosure integrity.