Product Description:

The MAF160C-0050-FR-C0-RG0-05-N4 is a liquid-cooled asynchronous housing motor manufactured by Bosch Rexroth Indramat within the MAF IndraDyn Asynchronous Motors series. Designed for flange-mounted installation on presses, extruders, or test stands, this motor delivers controllable torque at low base speed for continuous industrial automation duty. Its housing incorporates coolant channels so thermal power can be removed without external fans, which allows the frame-size-160 unit to operate inside sealed production cells while maintaining consistent speed regulation.

This motor relies on liquid cooling, routed through an enclosed rapid-action coupling that simplifies hose changes during maintenance. At its rated speed of 500 rpm, the stator windings remain within insulation class F because the coolant carries heat directly away from the frame. Rotor position feedback is provided by an incremental encoder that outputs 2048 increments per revolution and draws a regulated 5 V supply from the drive. The housing is sealed to IP65, so dust ingress and water jets do not affect the bearings or the internally mounted plain shaft seal. Standard grade rolling bearings support the rotor, and vibration level C indicates the permissible oscillation amplitude under nominal load.

The closed cooling circuit attaches to the motor through a 1/2 inch rapid-action coupling, matching common plant coolant manifolds. The frame-size 160 housing with length code C is prepared for flange mounting, and the power leads exit on the right through a keyed connector to simplify cabinet wiring. A plain shaft fitted with a shaft-sealing ring transmits torque to the driven machine, while delivery without a holding brake allows external mechanical locks to secure vertical loads when required. Operation is permitted in ambient temperatures between 0–40 °C, and winding code 0050 matches the stator impedance to drives that supply the required current.