Product Description:

The MAF160C-0050-FQ-M2-AP0-05-N1 asynchronous motor is manufactured by Bosch Rexroth Indramat as part of the MAF IndraDyn Asynchronous Motors series. Classified as a liquid-cooled housing motor, it is intended for industrial automation systems that require high continuous torque at moderate speed while managing thermal load through a closed coolant circuit. The unit pairs with IndraDrive converters to rotate production rollers, mixers, or forming tables without external gear stages, allowing compact machine layouts in food, plastics, and metalworking lines.

A liquid cooling jacket surrounds the 160-frame stator, and process water is fed through a 1/2 inch connection thread machined into the housing. Efficient heat removal permits the motor to sustain its rated speed of 500 rpm without derating. Protection class IP65 shields the windings from dust and spray, and winding code 0050 uses class F insulation. Standard rolling bearings, vibration level A, and balancing with a complete key help limit shaft oscillation, while a shaft sealing ring protects the keyway interface. The C-length lamination stack is installed in the 160 mm frame, power is delivered by a connector on the A-side, and no holding brake is installed. The mechanical build complies with DIN EN 60034-14.

The motor’s position is monitored by a multi-turn absolute encoder that uses the EnDat 2.1 protocol and resolves 2048 increments for each revolution. The sensing electronics accept a supply of 7–12 V, so the feedback line can be powered directly from common drive controllers. Mechanical integration is achieved through flange mounting, which mates the motor face to standard machine plates. Operation is specified for environments between 0 to 40 °C, and clearance around the coolant fittings improves access to the connections.