Product Description:

The MAF160B-0200-FQ-S2-HQ0-35-N3 is an asynchronous housing motor manufactured by Bosch Rexroth Indramat within the MAF IndraDyn Asynchronous Motors series. As a liquid-cooled asynchronous drive, it supplies continuous rotary power for general industrial automation, such as conveyor sections, forming equipment, or test stands that require compact mounting and reliable torque delivery. The design follows DIN EN 60034-14 vibration limits, uses a standard bearing set, and is built on a 160 frame with B length. The asynchronous design makes it suitable for applications that need steady torque over long operating periods. Its housing format also suits machine sections where installation space is limited and free airflow around the motor is restricted.

The motor reaches a rated speed of 2000 rpm, enabling stable throughput in applications that demand constant velocity. A protection class of IP65 seals the housing against dust and water jets so the unit can be mounted on exposed machine frames. Heat is removed by liquid cooling circulated through a 1/2-inch connection thread, eliminating the need for external airflow. Position feedback is supplied through an EnDat2.1 interface and a single-turn absolute encoder with 2048 increments; the sensor operates from a 7 to 12 V supply. This feedback arrangement gives the drive immediate rotor position data after startup. Shaft balancing with a complete key minimizes residual vibration, while the keyed shaft simplifies coupling to standard hubs. Because the motor has no shaft sealing ring, additional external sealing may be needed in fluid environments. The vibration level is class B, and winding code 0200 identifies the electrical design.

An insulation rating of class F permits winding temperatures up to 155 °C, supporting continuous operation under elevated internal heat. Flange and foot mounting, together with B-side power entry, allow flexible installation in either vertical or horizontal orientations. This mounting combination lets the motor fit machines that use base support as well as direct face attachment. Ambient service is approved from 0 to 40 °C. Power leads terminate in a turnable terminal box, which can simplify conduit alignment in cramped cabinets. Because the motor is supplied without a holding brake, any load that must remain fixed at standstill needs external retention.