MAF160B-0200-FQ-S2-HP0-05-A1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911339172
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MAF160B-0200-FQ-S2-HP0-05-A1 is part of the MAF IndraDyn Asynchronous Motors series and features liquid cooling through a 1/2 inch connection thread. This motor includes flange mounting, IP65 protection, and has a rated speed of 2000 min-1. It uses a single-turn absolute encoder with EnDat2.1 interface and an encoder resolution of 2048 increments.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MAF160B-0200-FQ-S2-HP0-05-A1 is an asynchronous induction motor manufactured by Bosch Rexroth Indramat within the MAF IndraDyn Asynchronous Motors series. It mounts directly to machinery through a flange interface and carries a terminal box on side B for the power leads. Cooling uses a closed liquid circuit, while an A-side fixed bearing supports the rotor. The shaft is balanced with a complete key and uses a shaft seal to help prevent lubricant escape. Position feedback is provided by a single-turn absolute EnDat 2.1 encoder, and the unit is delivered without a holding brake to minimize axial length. This arrangement supports compact installation where motor length and cable routing matter.
Performance and electrical data describe the motor’s operating range. The rated shaft speed reaches 2000 rpm, matching drives that deliver the corresponding synchronous frequency. Rotor position feedback has 2048 increments, and the encoder electronics accept a supply of 7–12 V, which simplifies cabling from the drive controller. The frame size is 160, which helps determine the mounting bolt circle and stator diameter. Environmental sealing reaches IP65, so dust ingress and water jets do not compromise the winding insulation. The motor uses winding code 0200, and the power connection on side B can be rotated to align conduit entry in tight cabinets.
Mechanical and thermal data describe the operating conditions for the motor. Coolant ports are machined with a 1/2 inch thread, allowing connection to common hydraulic fittings. Continuous operation is permitted from 0 to 40 °C, and the windings use F-class insulation to tolerate elevated internal temperatures before derating is required. Vibration severity is graded as level A under DIN EN 60034-14, supporting compliant installation on light machine frames. Proper coolant flow is required so the liquid circuit can remove heat from the housing. The motor uses frame length code B, and liquid cooling supports stable thermal behavior during operation.
Frequently Asked Questions about MAF160B-0200-FQ-S2-HP0-05-A1:
Q: What type of cooling does the MAF160B-0200-FQ-S2-HP0-05-A1 motor use?
A: This model uses liquid cooling, helping to maintain stable temperatures even during heavy-duty operation.
Q: What type of shaft configuration is provided on the MAF160B-0200-FQ-S2-HP0-05-A1?
A: The shaft on this motor is equipped with a keyway and a shaft sealing ring for secure mounting and additional protection.
Q: What kind of encoder is included on the MAF160B-0200-FQ-S2-HP0-05-A1, and what is its resolution?
A: This motor features an EnDat2.1 single-turn absolute encoder with a resolution of 2048 increments for accurate positioning.
Q: What is the rated speed of the MAF160B-0200-FQ-S2-HP0-05-A1 motor?
A: The MAF160B-0200-FQ-S2-HP0-05-A1 has a rated speed of 2000 min-1, suitable for applications requiring moderate rotational velocity.
Q: Does the MAF160B-0200-FQ-S2-HP0-05-A1 include a holding brake?
A: This model is manufactured without a holding brake.
