Product Description:

The MAF160B-0200-FQ-S2-HG0-35-N3 is a liquid-cooled asynchronous housing motor built by Bosch Rexroth Indramat within the MAF IndraDyn Asynchronous Motors series. As a liquid-cooled unit, it fits applications that need steady thermal management while delivering mechanical power to machine tools, conveyors, or forming equipment. It is supplied as a housing motor, meaning the stator and rotor come in a finished enclosure that connects to an external drive for continuous-duty industrial axes. This arrangement supports use in machines where stable operation and compact integration are both important.

This model employs liquid cooling to move heat away from the stator windings, allowing the motor to maintain torque density without relying on high airflow inside a cabinet. Its housing carries a protection rating of IP65, so internal parts remain isolated from dust and low-pressure water jets common on factory floors. The rated speed of 2000 rpm gives the drive a predictable base speed for vector control on material-handling lines and similar equipment. Position feedback is handled through an EnDat2.1 interface, and the single-turn absolute encoder resolves shaft location in 2048 increments, supporting precise closed-loop positioning during rapid load reversals. This feedback arrangement helps the control system maintain accurate motion when load conditions change quickly.

The motor can operate in ambient temperatures from 0 to 40 °C, which suits standard indoor production environments. Coolant enters through a 1/2 inch connection thread, helping the liquid circuit integrate with common machine plumbing. The motor uses flange and foot mounting, so it can be secured to a machine wall or anchored on a base frame. The unit is supplied without a holding brake, so any static load retention must be provided by the drive or by external mechanical restraints. This layout is useful where braking is handled elsewhere in the axis design and where sealed motor operation is required.