Product Description:

The MAF160B-0200-FQ-S2-FP0-35-V1 belongs to the MAF IndraDyn Asynchronous Motors series and is supplied as a liquid-cooled asynchronous housing motor for drive tasks that require continuous torque at moderate speed. It is intended for fixed-speed prime mover duties in machinery that operates with a closed cooling circuit. The frame size 160 with a B-length housing allows mounting through both flange and foot interfaces. This arrangement makes the motor suitable for conveyors, test stands, and forming equipment where a rigid installation is required.

The housing has an IP65 protection rating, which helps keep dust and low-pressure water jets away from internal components in general industrial environments. Rated speed is 2000 rpm, giving the motor a predictable operating point when it is paired with an inverter drive. Heat is removed through liquid cooling, and the cooling circuit uses a 1/2 inch threaded connection for the inlet and outlet. Rotor position feedback is provided by a single-turn absolute encoder with EnDat2.1 communication and 2048 increments per revolution, and the encoder operates from a 7–12 V supply. The motor is supplied without a holding brake, so stopping torque must be provided externally or through drive control.

Mechanical service life is supported by reinforced bearings, which can handle elevated radial loads from higher belt tension or coupled gearboxes. The windings use insulation class F, which supports the motor's thermal capacity during continuous operation. The unit operates in ambient air from 0 – 40 °C, and outside this range the coolant temperature or load must be adjusted to prevent thermal overload. The shaft is balanced with a complete key and protected by a shaft sealing ring, which helps maintain smooth motion while meeting vibration level A.