Product Description:

The MAF160B-0200-FQ-S2-FH0-05-N1 is a liquid-cooled asynchronous motor produced by Bosch Rexroth Indramat and organized within the MAF IndraDyn Asynchronous Motors series. As a housing motor for industrial automation, it provides continuous rotary power to driven elements. Its liquid circuit keeps the stator temperature stable during extended duty cycles.

This model uses liquid cooling through a threaded port sized 1/2 inch, allowing closed-loop coolant circulation that removes heat directly from the frame. Position data are delivered by a single-turn absolute encoder that transmits through the EnDat2.1 interface, and its resolution of 2048 increments supports fine speed and position control for the connected drive. The feedback electronics operate from a 7–12 V supply routed through the same connector. Under nominal conditions, the rotor turns at 2000 rpm, a speed matched to winding code 0200 so the drive inverter can supply rated torque without field weakening. A plain shaft simplifies coupling to gearboxes or belt pulleys, and the housing has an IP65 protection rating that seals the windings against dust and low-pressure water jets. The motor is supplied without a holding brake, so mechanical load-side locking must be provided where static load retention is required.

Mechanical integration is through flange mounting, which aligns the 160 mm frame size and B-length body with standard machine plates while maintaining vibration level A compliance under DIN EN 60034-14. Class F insulation permits winding temperatures up to 155 °C, supporting high thermal loading when coolant flow is stable. Operation is specified at ambient temperatures from 0 to 40 °C, and the bearing arrangement follows the standard design to accommodate radial forces from belt tension. A plain shaft without a sealing ring minimizes friction in liquid-cooled environments where external contamination is already limited by the enclosure rating.