Product Description:

The MAF160B-0200-FQ-S2-EP0-35-V3 is an asynchronous motor produced by Bosch Rexroth Indramat within the MAF IndraDyn Asynchronous Motors series. It is a liquid-cooled housing motor for automation lines that need continuous torque delivery from an inverter and stable operation during extended duty cycles. The unit uses flange or foot mounting and has a terminal box on the A-side that can be rotated, allowing the main cable entry to be aligned with the machine layout. This arrangement keeps power connections contained at the housing and supports flexible installation in enclosed equipment.

During operation, the rotor can be driven up to 2000 rpm, and it remains within vibration level B under DIN EN 60034-14. Cooling liquid enters through a 1/2 inch connection and circulates through internal channels, so heat is removed by liquid cooling rather than external airflow. The motor uses reinforced bearings to support radial and axial loads transmitted through the keyed shaft. An enclosure rating of IP65 helps block dust and water jets, while Class F insulation supports the temperature rise associated with heavy-duty use. A shaft sealing ring also helps keep debris away from internal steel surfaces during prolonged operation.

Position feedback is provided through EnDat 2.1. The single-turn absolute encoder resolves each revolution into 2048 increments and operates from a control supply of 7–12 V, allowing the drive to monitor shaft position during speed changes and load transitions. The rotor is balanced with a complete key, which helps reduce oscillation during operation. The motor is supplied without a holding brake, supports continuous duty in ambient temperatures from 0 to 40 °C, and fits machines that accept a frame size 160 housing with B length. A steel shaft transmits torque directly to couplings, and the sealed housing helps prevent coolant loss during production runs.