Product Description:

The MAF160B-0200-FQ-N0-HG0-05-A1 is a liquid-cooled asynchronous housing motor produced by Bosch Rexroth Indramat within the MAF IndraDyn Asynchronous Motors series. As a liquid-cooled unit, it serves in automated production cells where continuous torque must be delivered without allowing the stator temperature to rise beyond insulation limits. This motor drives conveyors, spindles, or presses directly from the plant’s AC bus, and because it lacks an integrated encoder, position feedback is supplied by external sensors when required.

The cooling circuit is based on liquid cooling, and coolant is routed through a connection thread that matches a 1/2-inch pipe. A certified enclosure rating of IP65 prevents dust ingress and guards against low-pressure water jets during washdown cleaning. The stator windings use class F insulation, allowing a maximum winding temperature of 155 °C while the surrounding ambient is kept between 0 °C and 40 °C. At its rated operating point, the rotor turns at 2000 rpm, matching drive operation built around the 0200 winding code. A shaft sealing ring helps limit contaminant entry at the output end, and the turnable terminal box on the B-side helps align power conduits without twisting cables.

Mechanical fit-up follows DIN EN 60034-14 with an A-sided fixed bearing that anchors axial load toward the drive side. The housing is prepared for flange mounting, and the motor uses a plain shaft so couplings or pulleys can seat directly on the journal. Vibration complies with vibration level A, which keeps dynamic forces within typical machine-tool limits. The motor uses frame code 160 and length B for its external geometry, while the cooling connection thread sits beside the turnable terminal box to reduce the installed footprint. The motor is supplied without a holding brake, and the B-side power lead-out keeps coolant hoses and electrical wiring separated.