Product Description:

The MAF160B-0200-FQ-M2-EF0-05-A1/S039 asynchronous motor is built by Bosch Rexroth Indramat for the MAF IndraDyn Asynchronous Motors series. As a liquid-cooled housing motor, it converts electrical energy into torque for continuous-duty axes in industrial automation lines where heat is removed through the stator jacket. The model belongs to the liquid-cooled asynchronous housing motor product type and integrates into flange-mounted stations that follow DIN EN 60034-14 dimensional rules.

This motor relies on liquid cooling, and coolant reaches the jacket through a 1/2-inch connection thread so the stator temperature stays stable at the rated speed of 2000 rpm. The design has a protection rating of IP65, enabling operation in dusty or splash-prone enclosures. Feedback is provided by a multi-turn absolute encoder that communicates through the EnDat2.1 interface and resolves rotor position to 2048 increments, powered by a 7–12 V supply. A labyrinth seal helps isolate the shaft from contamination, and flange mounting helps minimize alignment errors with the driven machine. The motor operates with vibration level A for general-purpose drive requirements. There is no holding brake, so the load must be secured by external holding equipment during a power-off event.

The motor uses frame size 160 and frame length B, and torque exits through a plain shaft that meets axial load limits for belt or coupling drives. Internal windings use a Class F insulation system, permitting winding temperatures up to 155 °C while the permissible ambient range is 0 to 40 °C. Bearing support is provided by an A-side fixed bearing, whereas the opposite side floats to accommodate thermal growth during operation. A turnable terminal box on the A-side simplifies cable routing, and winding code 0200 matches the electrical characteristics expected by compatible IndraDrive inverters.