Product Description:

The MAF160B-0200-FQ-M2-EF0-05-A1 is a liquid-cooled asynchronous housing motor produced by Bosch Rexroth Indramat for the MAF IndraDyn Asynchronous Motors series. Designed for flange installation on machine frames, the unit supplies constant torque to automated axes that need low thermal emission. It is a liquid-cooled asynchronous housing motor, so stator heat is routed to an external circuit rather than into the cabinet. That arrangement helps reduce heat released into surrounding equipment and supports use where cabinet space is limited.

Its dynamic range begins with a rated speed of 2000 rpm. The housing uses liquid cooling through a 1/2 inch connection thread that joins the jacket to a water or glycol loop. Frame size 160 in length B increases rotor diameter while keeping the motor body relatively compact, and the fixed bearing is on the A-side to limit axial play according to DIN EN 60034-14. A plain shaft behind a labyrinth seal transmits torque, and the flange mounting pattern secures the motor to gearboxes or machine plates. The motor is sealed to IP65, which helps keep out dust and water jets. Position data travels via the EnDat2.1 interface, supporting controlled operation in compact machine layouts.

The multi-turn absolute encoder provides 2048 increments per revolution, giving enough resolution for tight velocity loops and slow-speed homing. It draws 7–12 V, matching typical drive backplane supplies. The encoder feedback also supports stable low-speed control when the axis must move smoothly under load. Windings labeled 0200 use class F insulation, allowing elevated copper temperature without reducing normal motor operation. Vibration level A helps keep bearing loads and structure-borne noise low. Because no holding brake is fitted, any static torque must come from the drive or an external clamp. The motor is intended for operation from 0 °C to 40 °C.