Product Description:

The MAF160B-0200-FQ-M0-HK1-05-N1 is a liquid-cooled asynchronous housing motor produced by Bosch Rexroth Indramat within the MAF IndraDyn Asynchronous Motors series. It is built for integration into industrial automation cells where continuous torque delivery and controlled machine temperatures are required. The motor housing accepts coolant so that drive performance remains stable during extended duty cycles, making it suitable for tightly enclosed conveyor, forming, or spindle stations that cannot rely on ambient air for heat removal. As an asynchronous housing motor, it is intended for machine sections that need steady rotation and dependable thermal control in compact installations.

This model uses liquid cooling routed through a 1/2-inch connection thread, and the 1/2 inch port simplifies piping with standard plant fittings. Heat extraction supports stable operation at the rated shaft speed of 2000 rpm. An electrically released brake applies up to 100 Nm of holding torque for safe axis locking during power loss. The motor carries an IP65 enclosure rating, so dust and low-pressure water jets do not compromise internal components. Standard bearings, a B-length 160 frame, flange mounting, and half-key balancing support smooth rotation. A shaft sealing ring protects the keyway shaft from coolant ingress, and the terminal box on the B-side can be turned to align the power conductors with cabinet layouts.

Class F insulation handles winding temperatures associated with continuous current while supporting normal service life. Operation is allowed in ambient conditions from 0 to 40 °C, and derating is necessary outside that range. Vibration severity is held to grade A according to the balancing and housing geometry, which helps reduce the transfer of oscillation into attached machine frames. Compliance with DIN EN 60034-14 shows that the mounting interfaces and dynamic behavior follow recognized machine standards.